The "I have a 3D printer" kit

THIS IS FOR IF YOU WANT TO 3D PRINT THE CHARGE MOUNTS YOURSELF.

NOTE: I STRONGLY RECOMEND PRINTING IN ASA, WHICH REQUIRES A PRINTER WITH AN ENCLOSUER AND NOZZLE TEMP OF 260C

WHAT'S IN THE BOX

• The contacts for the deck
• All the hardware also included in the full kit
• Wiring and all needed crimp connectors to finish up the move to the top side
• Instructions on how to install

TOOLS YOU'LL NEED

• #2 Phillips Screwdriver
• 2.5mm and 3mm allen wrenches
• Wire Strippers for 16ga stranded wire
• Crimp tool
• Cordless drill
• 4mm (5/16") drill bit
• 6mm (1/4") drill bit